Adding data: meter readings and usage
There are several ways to add data to the Energy tool.
Note: this FAQ is for manually adding individual meter data into the Energy tool.
For any other format, please read the relevant FAQ:
- Bulk importing meter readings manually,
- Importing meter readings automatically,
- Bulk importing readings – file format for single meter,
- Bulk importing readings – file format for Multiple Meters,
- Bulk importing readings – file format for 15-30 Minute Data.
For instructions on how to read your meter, see here for:
- electricity meters
- gas meters
- a water meter (this is the same as either gas or electricity single-dial non-digital meters)
Adding data using the online Pilio software:
From anywhere on the site, to reach the "New reading" input page, you can either:
- click the "Add new reading" icon located in the top right corner (next to your profile icon);
- click on "Data -> Buildings & Transport ->Add data".
To add a meter reading or usage:
- select the building (optional),
- select the meter,
- add the reading in the "Record data" field,
- pick a date,
- press "Save".
You can also add a comment or upload a picture of the reading before pressing "Save".
Tips:
- if you cannot find the meter you wish to upload a reading for, make sure that you are on the correct impact section (e.g. energy, in the right corner of the main blu navigation bar).
- you can add data only for active meters! Meters marked as "hidden" will not appear here.
- once you've selected the meter you wish to upload meter readings for, a box will appear with some summary information including its last reading date and value.