What is the A-G energy rating?

Pilio Energy Software gives you an A-G rating for your building by calculating the average kWh (per fuel) per m2 for the year from all the data in our database.

 

The A-G mark follows the below rationale:


  • D is the average kWh/m2/year in Pilio.
  • G is 200% over the average.
  • A is 40% before the average.

 

Understanding the A-G Energy Rating of a Building

The A-G energy rating for buildings is a standardised assessment that indicates the energy efficiency of a building. This rating system is widely used in the European Union and other regions to help property owners, tenants, and buyers understand the energy performance of buildings and make informed decisions about energy consumption.


Understanding the A-G energy rating of your building is essential for effective energy management. It provides valuable insights into your building's energy performance, helps identify areas for improvement, and supports informed decision-making for energy efficiency upgrades. By integrating this knowledge with energy management software, you can optimise energy use, reduce costs, and enhance the overall sustainability of your building. The next steps involve conducting an energy audit, analysing the results, developing and implementing an action plan, and continuously monitoring progress to achieve your energy efficiency goals.


The A-G Energy Rating Scale for Buildings

 

  • A (Green): Most energy-efficient. These buildings consume the least energy, resulting in lower energy bills and minimal environmental impact.
  • B: Very efficient.
  • C: Efficient.
  • D: Average efficiency.
  • E: Below average efficiency.
  • F: Inefficient.
  • G (Red): Least energy-efficient. These buildings consume the most energy, leading to higher energy costs and greater environmental impact.

 

How the A-G Rating is Determined

How Pilio Provides an Indicative A-G Rating: Pilio gives you an A-G rating for your building by calculating the average kilowatt-hours (kWh) per square meter per year for each fuel type, based on the extensive data in our database.


A-G Energy Rating based on an Energy Performance Certificate (EPC): A-G Energy Rating based on an Energy Performance Certificate (EPC) assessment, which evaluates various factors, covers:

  1. Building Fabric:
  2. Insulation levels in walls, roofs, and floors.
  3. Window glazing and doors.
  4. Heating and Cooling Systems:
  5. Efficiency of heating, ventilation, and air conditioning (HVAC) systems.
  6. Type and efficiency of boilers, heat pumps, and cooling systems.
  7. Lighting:
  8. Efficiency of lighting systems and use of natural light.
  9. Renewable Energy Sources:
  10. Presence and efficiency of renewable energy installations like solar panels or wind turbines.
  11. Energy Consumption Patterns:
  12. Historical energy usage data.

 

Deep-Dive: Importance of Understanding the A-G Rating

 

  1. Energy Efficiency Insights:
  2. Helps identify how well your building conserves energy and where improvements can be made.
  3. Provides a benchmark to compare your building's energy performance against similar properties.
  4. Cost Management:
  5. Understanding your building's energy rating can help you estimate potential savings from energy efficiency upgrades.
  6. Higher-rated buildings generally incur lower energy bills, which can significantly impact your overall operational costs.
  7. Environmental Impact:
  8. Reducing energy consumption contributes to lower greenhouse gas emissions.
  9. Enhancing your building’s energy efficiency aligns with sustainability goals and environmental regulations.
  10. Property Value:
  11. Energy-efficient buildings often have higher market values and are more attractive to buyers and tenants.
  12. A good energy rating can be a selling point and increase the property's appeal.

 

Utilising Energy Management Software

 

Energy management software can play a crucial role in leveraging the A-G energy rating for effective building management:

  1. Data Integration:
  2. Consolidate energy performance data from various systems and devices.
  3. Track real-time energy consumption and efficiency metrics.
  4. Benchmarking:
  5. Compare your building's energy performance against industry standards and similar buildings.
  6. Identify areas for improvement and set realistic energy-saving goals.
  7. Optimisation:
  8. Use insights from the energy rating to prioritise energy efficiency projects.
  9. Simulate potential energy savings and ROI for proposed upgrades.
  10. Monitoring and Reporting:
  11. Continuously monitor energy usage to ensure efficiency measures are effective.
  12. Generate reports to track progress and communicate improvements to stakeholders.

 

Next Steps in Energy Management Knowing the A-G Rating

 

  1. Conduct an Energy Audit:
  2. Hire a certified energy assessor to evaluate your building and obtain an Energy Performance Certificate (EPC). Pilio offers a service to conduct your building's energy audit.
  3. Analyse the Results:
  4. Review the EPC report to understand your building’s current energy rating and specific areas needing improvement.
  5. Develop an Action Plan:
  6. Prioritise energy efficiency upgrades based on the audit findings.
  7. Consider improvements in insulation, HVAC systems, lighting, and renewable energy installations.
  8. Implement Upgrades:
  9. Start with high-impact, cost-effective measures that can quickly improve your energy rating.
  10. Plan for larger, long-term investments that will significantly enhance energy efficiency.
  11. Monitor Progress:
  12. Use Pilio energy management software to track the impact of implemented measures.
  13. Regularly review energy consumption data and adjust strategies as needed.
  14. Educate and Engage:
  15. Involve building occupants and stakeholders in energy-saving initiatives.
  16. Provide training and resources to encourage energy-efficient behaviours.

 

The following FAQ’s may help you further understand your performance and results with Pilio energy software:

Back to the Help Centre